92 Drag Star Bracket Racer Metallic Gray - Race Star Wheels (5 Lug 5x115)
Save $ 89.59
Race Star 92 Drag Star Bracket Racer metallic gray wheels are sure to give your ride a great new look. They have an extremely lightweight design with a lifetime structural warranty and an amazing metallic gray finish. If you're looking for a wheel engineered to fit many early or late model musclecars with no brake or caliper modifications, then the 92 Drag Star Bracket Racer metallic gray wheels from Race Star Industries will fit the bill.
92 Drag Star Bracket Racer Metallic Gray 17x4.5 5x115BC 1.75BS
92 Drag Star Bracket Racer Metallic Gray 17x9.5 5x115BC 6.125BS
Airaid MXP Series Cold Air Intake w/ SynthaMax Dry Filter (11-14 GT with Boss Intake)
Save $ -391.19
Increase Your Mustang's Horsepower and Torque Gains
One Piece Roto-Molded Air Box
No Recalibration Needed
Superior Reusable Air Filter
Complete Stock Upgrade
Easy Bolt-On Installation
Fits 2011-2014 GT w/ BOSS Intake and 2012-2013 BOSS Mustangs
American Flag Rear Decklid Vinyl
Save $ -65.00
American Flag deal for your rear decklid on 2011-2014 mustangs. Works best with RTR decklids but can be cut to go around the faux gas cap. Can be ordered with or without a white background.
BMR Differential Bushing Kit
Save $ -49.95
5 Piece Bushing
Improves Straight Line Acceleration Handling
Fits all 2005-2014 Mustangs
BMR Non-Adjustable Rear Lower Control Arms - Poly Bushings
Save $ -139.95
Greatly Improve Handling
Reduce Wheel Hop - Improve Traction
MIG-Welded 1x2" Square Steel Tubing
5 Pounds Lighter Than Stock
High-Durometer, Greasable Polyurethane Bushings
Sold as a Pair
Made in the USA
Ideal for Street Performance, Drag Race & Road Race
Fits All 2005-2014 Mustangs
BMR Non-Adjustable Rear Upper Control Arm
Save $ -89.95
Better Traction, Quicker Launches, Less Wheel Hop
Durable 1-5/8" Heavy Wall DOM Tubing
Black Hammer-Tone Powder Coat Finish
Spiral-Fluted Grease-Able Polyurethane Bushings
Fits All 2011-2014 Mustangs
Borla Stinger S-Type Axle-Back Exhaust (11-12 GT)
Save $ -748.99
Great V8 Sound
4.5" Polished Tips
Durable Stainless Steel Construction
High Flow Stinger Mufflers
Fits 2011-2012 GT and 2012 BOSS Mustangs
Boundary Crank Sprocket 11-17 Mustang GT
Save $ -99.99
Boundary Crank Sprocket 11-14 Mustang GT
New and affordable Billet Crank Sprocket Option for 11-14 Mustang Coyote Platform. Protect your assets and make the power you deserve without worrying whether your engine's OPG or Crank Sprocket will go!!
Ford Performance 5.0L Cobra Jet Cold Air Kit
Save $ -375.95
Add up to 42 HP and 25 TQ with Tune
Required for Cobra Jet Intake Manifold Install
Improves Horsepower and Throttle Response
High Flow Molded Plastic Air Inlet, Tube and Filter
102mm Air Inlet Diameter
Genuine Ford Racing Part
Computer Tune Required
Fits 2011-2014 GT and Boss 302 with a Cobra Jet Intake Manifold
Ford Performance Cobra Jet Intake Manifold
Save $ -999.99
Original Equipment on the Naturally Aspirated 2013 Cobra Jet Race Car
Runners Tuned for 7750 Rpm Peak Power
Made from Light-Weight Composite Material
Total Intake Volume 635 Cubic Inches
Black Finish with a Ford Performance Badge
Fits 2011-2014 GT and 2012-2013 BOSS Mustangs
Fits 2015-2018 GT Mustangs with a Manual Transmission
Harmonic Balancer Bolt Kit (11-17 GT)
Save $ -38.82
ARP Harmonic Balancer Bolt Kit for all 2011, 2012, 2013 and 2014 Mustangs with a 5.0L Engine.
ARP's Harmonic Balancer Bolt Kit, for all 2011, 2012, 2013 and 2014 5.0L Mustangs, is manufactured in the USA and contains the bolt and washer, as well as ultra-torque fastener assembly lubricant necessary for correct and secure installation.
ARP has developed these ultra-strong Harmonic Balancer Bolts that let you exert maximum clamping force to ensure that the balancer is securely locked in position. Constructed from 8740 Chromoly with a black oxide finish, these bolts are rated at 200,000 psi tensile strength! An extended length and a 12-point head accept a deep socket which provides this bolt with increased resistance to stripping.
Reducing torsional vibration is pivotal to preventing overwhelming resonance and eventually crankshaft failure. As the crankshaft flexes and twists, the harmonic balancer absorbs incredible amounts of kinetic energy. This high quality and sturdy ARP Harmonic Balancer Bolt Kit helps to maintain the integrity and firmness of the harmonic balancer, or crankshaft damper, in all 2011, 2012, 2013 and 2014 5.0L Mustangs.
NGK Iridium IX Performance Spark Plugs - Heat Range 7
Save $ -80.00
Perfect for Nitrous and Force Inducted Engines
Iridium Tip for a Constant Stable Spark
Improves Fuel Economy and Lower Emissions
Heat Range: 7
NGK Part# LTR7IX-11; NGK Stock# 6510
14mm Thread Pattern
Fits 2011-2017 GT and 2012-2013 BOSS Mustangs
Sold as a Set of 8
On 3 Performance 2011 – 2014 Mustang 5.0 Single Turbo System
Save $ -3,999.00
On 3 Performance has been designing turbo systems for the Coyote 5.0 platform since it was released in 2011. We first launched our extremely popular twin turbo system which people have been running now for over 5 years. Cars have now been into the 7's utilizing conponets from our system now in the quarter mile with a proven track record. If you check out our Quickest Coyote List, we started with 10 spots and had to expand to over 20 spots now to account for customers currently running 9.99's or quicker! We see that some customers are specifically looking for a Coyote 5.0 single turbo system option. This is a less complex system and will be slightly easier to install for the average person building their car out of a garage. Out of the box, our system is going to have amazing potential and be geared toward those targeting 600-850 rear wheel horsepower (850-1300HP options available as upgrades). Don't worry, we also have those covered who are looking to build 1000+ HP applications as you will read in the performance section. We outline several turbo and exhaust options that you are able to select to hit your desired goal. Quick example, our shop car was tested with full exhaust and the included On 3 Performance 2nd Gen 76mm CNC billet wheel turbo. We put down an impressive 700rwhp on 10psi through an automatic transmission, turned it up to 15psi and we were sitting at 830rwhp. At that power level, your looking at a low 9 second e.t potential 1/4 mile time! This system allows for outstanding street manners and yet very responsive and quick into boost when compared to the other T6 turbo system.
Hot side Spec:
Instead of making the stainless cast manifold an option like the twin system, we are making it standard in our single turbo kit. Our system uses a tweaked version of our forward facing manifolds that have already been proven over 1300rwhp. One of the most important aspects to the turbo kit is that we wanted to retain the factory kmember and not require an aftermarket tubular unit. Connecting to the turbo manifolds is a 304ss 2.5″ merge pipe to route exhaust gases to your turbo. In order to have optimal control over boost, we integrated dual On 3 Performance 44mm wastegates. This allowed us to dial the boost in all the way down to 6psi and hold steady. Both gates are vented to atmosphere and this sounds amazing.
We then have several options for downpipes that you will find in our optional parts section. When ordering your kit, you will need to select if you want the full 4.0″ downpipe with your kit or the optional race exhaust. The race exhaust is a bumper exit downpipe and does require you to cut a hole in the bumper should you decide to go this route.
Exiting the turbo, our downpipe transitions to 4.0″ to help keep drive pressure as low as possible. Many people know the Coyote platform flows a lot of air and valve float becomes an issue. So in order to combat this, we were able to design a full 4″ system through the factory suspension. You will have to remove the front sway bar but our kit will not require a kmember upgrade like most of the kits on the market.
Cold Side Specs:
Our cold side design is trick, its constructed from 6061 aluminum and all bead rolled tubing. Coming out of the turbo, its 3.0″ tubing from turbo to the intercooler. Out of the intercooler we have a small 3.0″ section then transitioned to 3.5 up to your intake manifold. We offer 2 options for your charge pipe, one being a stock intake charge pipe and the other being for cars running the Boss intake manifold. Note, when ordering your turbo system, YOU MUST select which intake you are running so we ship you the correct charge pipe.
To mount the intercooler, we went above and beyond to make this a clean and easy install. We designed a custom bumper support that removes the factory unit and constructed from 6061 aluminum to offset some of the added weight. This has our intercooler mounting points integrated into it for a clean finished product. Coming standard with each kit, we include the On 3 Performance 4″ race core bar and plate intercooler. This has been proven on our shop car to support 830rwhp and keep the IAT in check.
To make each connection, we supply our On 3 Performance 5 ply silicone couplers. Then to secure each in place, you will receive our stainless t-bolt clamps for the optimal 360 degree clamping. One other great feature is that we correctly sized the intercooler tubing to bolt the factory mass air meter in place. No need to spend $400+ on an extended range maf'. The flange is already pre-welded in place
We have designed our kit around one of the nicest and most powerful turbochargers we have produced to date. Our new 2nd Gen On 3 Performance 76mm which features a CNC billet wheel, 4″ anti-surge inlet compressor cover and 3.0″ outlet. This powerful turbo had no problem keeping back pressure to a minimum with our testing and yielded us 830 rear wheel horsepower at 15psi during testing. At this time we did not feel the need to push this turbo option any further but confident it will still have no problem making more power. Anything over this power level, we would recommend the customer to upgrade and go with our On 3 Performance 88mm turbo option. This is more focused toward the person trying to make 850+ rwhp and not your average street car. During testing we did dyno our shop car with the On 3 88mm turbo and 13psi and made 810rwhp. Keep in mind this will be slightly slower into boost but easily cover the 850 – 1000HP span.
For the person looking looking for the most powerful and highest HP option, we are doing a T6 option. Its going to utilize one of our newest designed turbos with a cast stainless steel v-band entry turbo. This is going to keep our turbocharger around 12lbs lighter than most compatible units on the market. The turbo itself is more compact and yet still will flow the same volume of air when compared to a traditional massive 4 bolt T6 housing
A huge benefit to our design is that we were able to design around the factory Kmember. This makes for a much easier bolt on kit and saves a ton of time in labor. Its not to say you cannot run tubular suspension to drop weight but this is not required with our system.
You will also notice we have a few different exhaust options that you can go with. Each kit is going to contain the full 4.0″ turbo back exhaust that gets you to the over the axle(catback) connection. We also see the popular trend of guys wanting to run the bumper exit style exhaust which clearly is a more race inspired option. This is completely a personal preference and selection should be made depending on what you are building the accomplish. Keep in mind if you plan to run full exhaust, you MUST have an upgraded axle back system. If you attempt to run full exhaust through stock mufflers, your going to create a massive restriction which will drive back pressure through the roof. On our test car, we run a muffler delete system so we have zero restrictions. You will also find we offer an Over the Axle tubing upgrade that will eliminate the factory resonator pipes. We also run this on our shop car and highly recommend this option as well. You can select it while checking out in our upgrade item list
Details When Ordering:
When you order we must know if you are running a stock intake or Boss intake. We build the charge pipes to accommodate either of those options so please be sure to select when placing your order. As far as other options, we suggest: Boost controller, Vacuum block, 47# or ID1050 injectors, and a tune. These are the bare essentials to get your car finished and completely dialed in.
PMAS Cold Air Intake
Save $ -299.00
Improved Power Gains
Quicker Throttle Response
High-Performance Conical Air Filter
Aluminum Heat Shield With Injection-Molded Inlet Tubes
Comes With Durable Injection-Molded MAF Housing
Can select tune or no tune required intake
Ninety-Day Limited Warranty
Fits All 2011-2019 Ford Mustang GT Models
Sniper EFI Sheet Metal Intake Manifold
Save $ -559.95
3mm (1/8") thick T6061 Sheet Aluminum construction, more durable than competitive intakes
90mm Throttle Body Bore Openings
100% TIG welded
Available for EFI and Carbureted applications with custom Holley Sniper logo
EFI Intakes include 3/8" Fuel rail kits (Sniper logo laser engraved)
Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
Turbosmart e-Boost2 Boost Controller - 60mm - Black (79-19 All)
Save $ -571.94
Boost Management System
60mm Black Billet Aluminum Construction
Monitor, Control, Map & Compensate Boost
Control Water Spray, Methanol or Nitrous Injection
Manage Shift & Warning Lights
Read and Monitor RPMs
Change Boost on Demand
Standard w/ 60 PSI Max Pressure
Easy to Use Electronic Controller
For Use with Turbocharger Equipped Mustangs
Viking Performance Warrior Series Double Adjustable Rear Shock
Save $ -200.00
Digressive Valved Shock
Lightweight Aluminum Construction
Clear Anodized Finish
PTFE/ Bronze Piston Seals
19 Positions of Adjustment
Fits 2005-2014 Mustangs
VMP PLUG AND PLAY FUEL PUMP VOLTAGE BOOSTER 40AMP FOR 11-20 MUSTANG
Save $ -359.99
We all know the proven benefits of a VMP Tuning Fuel Pump Booster! Efficient, continuous 18v output (40A) designed to get the most performance from your stock or aftermarket pumps.It stabilizes voltage as well as increasing flow rate. Simply tossing a larger set of injectors into the system won't necessarily be the answer to your high performance fueling needs.
Until now, Fuel Pump Boosters(or ""Boost-A-Pumps(r)"", a name owned by Kenne-Bell)have been seen as an ""I'll get to it.....someday"" proposition. Why? Because the average person doesn't have the experience nor confidence that they'll hook them up correctly. We heard you and we've solved the problem, making it uber-simple to install the performance headroom you need,doing it right the first time!
Whiteline Positive Shift Manual Transmission Mount Bushing Insert